Lexmark Mc3224dwe Scan To Computer

How To Do Lexmark MC3224DWE Scan To Computer?

As the Lexmark MC3224dwe printer uses the flatbed scanner type, you can easily scan the documents using the scan to computer feature that your printer offers. Here, in this article, you’ll learn How To Do Lexmark Mc3224dwe Scan To Computer with simple and easy steps.

  • Home »
  • Scan To Computer On Lexmark Mc3224dwe

Before you start using the scanning feature, make sure that you meet the requirements needed for scanning.

  • Try to connect your printer and computer to the same network.
  • Ensure that you’ve updated the printer firmware. If not, try to update the firmware.

Scan To Computer Feature On Lexmark Mc3224dwe:

  • On your computer, locate and run the Lexmark ScanBack Utility. The Lexmark ScanBack Utility software can be downloaded from the official Lexmark website.
  • Now, in the setup wizard, you can click Next.
  • Click Setup.
  • Try to add the printer’s IP address. The printer’s IP address can be viewed on the printer’s home screen. Now, continue with the following on-screen instructions for Lexmark Mc3224dwe Scan To Computer.
  • When prompted to select the size of your original document, you can select the correct size of it and then click Next.
  • You’ll be asked to select the file format and scan resolution. As your Lexmark printer allows you to scan with the best resolution, you can select your preferred scan resolution and then click Next.
  • After selecting the scan resolution and file format, you can assign a scan profile name by typing a unique name in the required field.
  • Click Next to continue with the step given below.

Now, you can select the location to save the scanned documents and then click Next after creating a file name.

Finally, click Finish for Lexmark Mc3224dwe Scan To Computer.

You can load the originals on the scanner glass of your Lexmark MC3224dwe printer. Here’s how to load your documents.

  • On your printer, open the top cover.
  • Load your originals on the scanner glass. You can also load your originals in the automatic document feeder (ADF).
  • On your printer control panel, go to the home screen.
  • From the home screen, press Scan Profiles to navigate to the Scan to computer feature.
  • Press Scan to computer.

To check whether the scan to computer feature is enabled or not, follow the steps given below.

  • On your printer control panel, press Settings to carry out Lexmark Mc3224dwe Scan To Computer operation.
  • Navigate to the Visible home screen icon by selecting the Devices option.
  • Now, select Scan to computer and then press Display.
  • You can also save the scanned images or documents to the preferred destination by using Windows Fax and Scan.

To use Windows Fax and Scan, you need to add your Lexmark printer to your Windows computer.

How To Add Printer.

  • At first, try to install the printer driver onto your computer.
  • Navigate to the Add a printer or scanner option by clicking the Printers and Scanners option.

Now, you can start adding your printer depending upon its connection.

After Adding Your Printer, Follow The Steps Given Below.

  • On your printer, open the top cover.
  • Load the originals on the scanner glass. If you wish to load your originals using the automatic document feeder (ADF), you can load them into it also.
  • On your Windows computer, try to open Windows Fax and Scan and select a scanner source.
  • Now, perform the required scan settings and start scanning.

Hopefully, you’ve learned how to do Lexmark Mc3224dwe Scan To Computer.